Bath and Kitchen Pro Magazine
Search in: EditorialProductsCompanies
Bathroom Made Anew (Part 5): A Done Deal!!
by Jim Camillo
November 25, 2008

ARTICLE TOOLS
EmailEmailPrintPrintReprintsReprintsshareShareshare 

Enlarge this picture
Photos by Jim Camillo.


Day 7

Upon his arrival, the contractor got to work carefully removed the six protruding tiles at the back of the shower. Then, to assure my happiness, he let me stand next to him and monitor where he placed the tiles in the mastic and the appearance/thickness of the grout lines.

Overall, setting the tiles in the mastic took about half a day. He’d have to come back tomorrow to grout them. No problem.

Around this time, the contractor’s helper arrived and the two installed the medicine cabinet, again with my input on where to place it.

Next came the installation of the shower door (this took another couple hours) — and yet another bump. The towel bar didn’t fit on the front of the shower door and would need to be ordered. I called the distributor to get the process started. He told me expect it within 1-2 days.

Just before leaving for the day, the contractor did a little work on the faucet to try and stop the dripping.



Day 8

Before the contractor arrived, I slowly opened the vanity cabinet to check the bucket underneath for water. Please be dry, I thought to myself. No such luck — there were a few drops from when I used the sink that morning. This bump was a real toughie.

The contractor arrived and we discussed the plan for the day: fix the faucet, place the grout, and seal the door and shower. I then left for work.

During the afternoon, I’d gotten a call that the towel bar had come into the distributor and that I could pick it up at any time.

When I arrived home, I checked the contractor’s work. The replaced tiles seemed a little better, but not perfect. I’d just have to live with this imperfection.


As for the faucet, I’d check it tomorrow morning after some extensive use that night.

The sealant looked fine. He had placed a bead of clear sealant along the sides and bottom of the shower door, and the vertical corners where the walls of shower tile came together.

Only the faucet and towel bar remained.

The project was so close to completion — yet I wanted a day off from the process. So I called the contractor that night and asked him to come the day after tomorrow to install the towel bar and review the whole project one last time.



Day 9

Would this finally be the Day of the Done Bathroom? Time would tell.

I checked the bucket under the sink after using it and saw…no water. Yes!!

The contractor came and installed the towel bar.

We reviewed the project and I told him I was satisfied. We shook hands to complete the deal.

Yes! Yes!

It took a little longer than I planned, but the bathroom is now done and it looks fabulous.

Without question, remodeling my bathroom is definitely one of the best investments I’ve made as a homeowner — as well as being the most timely.

You see, October was National Kitchen & Bath Month.

What a great way to celebrate it!

[Even if it is a little belated.]



Jim Camillo
camilloj@bnpmedia.com
Jim Camillo is Editor of PM Engineer magazine. He can be contacted at camilloj@bnpmedia.com, phone 630-694-4011, or fax 248-283-6547.

  Comments (0)Post a Comment
 



 



Please enter the verification code as it appears in the box above.
 

Bath and Kitchen Pro eNews

Delivered twice-monthly, Bath & Kitchen Pro e-Newsletter (formerly Bath & Kitchen e-News) now has more than 10,000 opt-in subscribers.

Radiant & Hydronics e-NewsRadiant & Hydronics e-News is a twice-monthly newsletter compiled by the editorial staff of PM, Supply House Times and PMEngineer magazines.

Environmental Design + Construction eNewsletterA monthly eNewsletter brought to you by the editor's of Environmental Design + Construction magazine on the latest green building news, products and events.

Stone World Fabricator eNewsStone World remains the leading publication in the stone industry and continues to stay on the cutting edge of technology by bringing this eNewsletter to its readers.

TILE eNewsTILE eNewsletters deliver up-to-the-minute information on industry news, market conditions, product developments and best industry practices monthly.

My Plumbing Portal enewsExpert plumbing and piping industry news and information from our magazines and eNewsletters.

Plumbing & Mechanical magazinePlumbing & Mechanical is the undisputed leading trade magazine for reaching contractors on the "wet" side (plumbing-piping-hydronic heating) of the plumbing and mechanical market.

Supply House TimesSupply House Times magazine serves the Plumbing, PVF, HVAC and Hydronics distributors and provides?cutting edge features, news and technology information that's needed to advance the industry and succeed in the 21st-century PHCP business.

PM EngineerPM Engineer is the core magazine for reaching design and specification engineers on the wet side of the industry (plumbing-piping-hydronic heating and fire protection).

Reeves JournalReeves Journal, the oldest publication in the plumbing industry, addresses the regional opportunities and challenges facing p-h-c contractors, wholesalers and engineers in the 14 western United States.

© 2008 BNP Media. All rights reserved. | Privacy Policy